You are viewing jeff_duntemann

December 2014

S M T W T F S
 123456
78910111213
14151617181920
21222324252627
28293031   
Powered by LiveJournal.com

The RPi Enthroned

I wonder how many Raspberry Pi boards will spend their entire working lives sitting cockeyed on a desk somewhere, at the center of a tangle of cables. That's how mine was until a couple of days ago, when despite my cough I allowed myself a few minutes of quality screwdriver time to pull a proper RPi system together.workstation-500wide.jpg

It didn't take much. Mostly what it took was a 2004-era Dell SX270 all-in-one system minus the SX270, which I now use as a bookend. The key component is a heavy stainless steel base with a VESA monitor mount and a bracket to hold the SX270 behind the monitor. The monitor itself is an unexceptional Dell 1704fp, with a native resolution of 1280 X 1024. (Those now sell for ~$50 on eBay.) That's more than enough pixels for an RPi, although I tested it on one of my 21" 1600 X 1200 behemoths and the little gadget did quite well overall.

BackView-500wide.jpg

I had already mounted the board on an aluminum plate, and all I had to do this time was drill two holes and bolt the plate to the SX270 mounting bracket. I may dress the wires a little to keep them from placing any torque on the connectors, but it works well as-is.

I was surprised to find out that the MagPi magazine is actually laid out on an RPi, using the open-source Scribus layout program. I installed Scribus via apt-get and poured some text into a layout. (I've been playing with Scribus for years.) Brisk! I guess we need to stop boggling at the capabilities of tiny little computers with all of two ICs on the mobo.

It certainly does a good job with FreePascal and Lazarus, which is why I went to all this trouble. They've now sold half a million of these things. At least a few of those people ought to be willing to buy a Lazarus tutorial for it. We'll see.

Comments

You've given me something to think about.
You can't miniaturize fingers and eyeballs, no matter how tiny a form factor you can fit your electronic functionality into. This is an absolute design wall we're going to be struggling with for a while, I think. This is one of the basic problems with smart phone interface. You can get more functionality into the package than you can get at.
Your picture of the lash-up on the back of the monitor shows me I need to extend my thinking to physical interface. When the computer is so small that you have to add extra space to physically fit the human manipulable I/O, you have strange design problems.